I will soon have to buy more since my 50lb. If you get any, I would like to see a close-up photo of the product. I am curious to see if BP's manufacturer has improved their quality control on this product. 180' bore, (correct me if I am wrong, but I am pretty sure). It is worth a try, and it's cheap enough anyway. Well anyway, BP has had that back in stock for well over a year. Some members began to complain to BP that their product was inconsistent to the point where BP pulled the product from their catalog. Over at the other forum, years ago we ended up buying Ballistic Products' stock up. Not a problem if you reload shotshells, eh?

When screened, about 25% of what you buy will be waste. Especially when in 'Full Psycho' mode (as DUBB likes to say ).

It is actually all I use in them for rodent control.ĭon't expect it to be super accurate, but I don't complain at all. In my experience when screened, I find it excellent ammo to use in the 30 round original mags. You have to keep in mind that this is meant for shotgun loads and NOT bb guns.

It needs to be screened as it was inconsistent in size and roundness. That is in fact the same lead DUBB and I have been using for a handfull of years. This is what was happening when I thought there was a problem with the firmware. This draws power from the solenoid causing a burst, and then the counter continues to run until you release the trigger. You will find when you drop below around 20 V the motor draws a ton of current fighting the poundage necessary to force the bb's into firing position. If I were to go further I would try a weaker valve spring, and let the air pressure do more of the work for the return. That's the only spring I didn't change in the firing, and feeding. Quote from: Parellax on February 20, 2016, 08:14:08 PM Yes. I would love to try one of your augers, and give you a report. This is where a real slider switch would come in handy to bridge the jumper for a full range gun. You will still have the same problem of the motor overdrawing current with your motor, but exasperated. I just can't definitively say with the limited air I had. I did many tests to get it to 4K without success. The motor you, and Cam came up with is good for 3K with a magnetic auger at 100% with a tighter clutch, and no bb shaker.

What happened to drozd blackbird